| Type: | Injection Blow Molding |
|---|---|
| Structure: | Vertical and Horizontal Composite |
| Plastic Type: | Thermoplastic |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Preform system | Unit | STIBM95S |
| Screw diameter | mm | 65 |
| Screw L/D | L/D | 23:1 |
| Shot volume | cm3 | 660 |
| Injection weight(HDPE) | g | 625 |
| Max.Screw speed | rpm | 10-235 |
| Heating capacity | KW | 12.6 |
| No.of heating zone | Qty | 3+N |
| Clamping system | ||
| Clamping force of preform | KN | 1008 |
| Clamping force of blowing | KN | 221 |
| Opening stroke of mold planten | mm | 160 |
| Lifting H of rotary table | mm | 80 |
| Max.Platen size(L×W) | mm | 900×480 |
| Min.mold thickness(H) | mm | 280 |
| Heating capacity of mould | KW | 8 |
| Stripping system | ||
| Stripping stroke | mm | 260 |
| Dry cycle | sec | 3 |
| Driving system | ||
| Motor power | KW | 26+26+3 |
| Hydraulic pressure | Mpa | 14 |
| Product range | ||
| Suitable bottle range | ml | 5-800 |
| MAX.bottle height | mm | ≤220 |
| Max.Dia.of bottle | mm | ≤100 |
| Other | ||
| Min.air pressure | Mpa | 1 |
| Discharge rate of compressed air | m3/mm | ≥1 |
| Water flowage | m3/h | 6 |
| Total rated power with mold heating | KW | 75.6 |
| Dimension(L×W×H) | M | 5.0×2.0×2.6 |
| Net weinght | ton | 12 |
){kind=link}