High-Glasses Steam Equipment for Injection Machine

• Warranty: One Year
• Shaping Mode: Injection Mould
• Surface Finish Process: Mirror Polishing
• Mould Cavity: Single Cavity
• Plastic Material: PC+ABS
• Process Combination Type: Single-Process Mode
• Model NO.: 160L
• Application: Car, Household Appliances, Furniture, Commodity, Electronic, Home Use, Hardware, TV/ Laptop Panel
• Runner: Steam
• Design Software: UG
• Installation: Fixed
• Certification: CE, ISO
• Standard: HASCO
• Customized: Customized
• After-sales Service: One Year
• The Heating Medium: Steam: Temperature 180ºC-230ºC
• Heat Content: The Enthalpy of 1kg of Steam Is 2777.67 Kilojoules
• The Heating Mode: Heat Release (Instantaneous Physical Transformatio
• Heating Power: Small Power of 80-150kw Can Be Used for High-Power
• Transport Package: Wooden
• Specification: 290× 80× 180CM
• Trademark: STONEPACK
• Origin: China
• Production Capacity: 1MPa

Product Description

Description of equipment features:
Advantages in production cycle:
The medium steam (enthalpy 2777.67 KJ) used in our high-gloss trackless equipment is super hot water (enthalpy 762.84 KJ) about 3.6 times, heating speed.
We are 600L large-capacity gas storage tank, which can ensure sufficient stable pressure when heating in production and prevent the product from stable production due to temperature fluctuation caused by pressure fluctuation.
Advantages in energy consumption:
Energy saving:1 when steam is heated, the temperature of the storage tank can reach about 85ºC through special pipe channels, and the set temperature of 180ºC can be heated rapidly, saving the heating time from the water source of environmental temperature to 85ºC, so as to achieve the purpose of energy saving.
2. Energy saving: conventional heating mode: if the steam inlet valve is opened for 15 seconds, the steam outlet valve is opened for 15 seconds to ensure the mold surface reaches the set temperature.
Our heating mode: if the steam inlet valve is opened for 15 seconds, our company will open the steam outlet valve according to the product conditions
6 seconds or so, and 9 seconds or so for the valve to close and not to output steam.
Control principle: due to the gas end effect, the pressure in the heating channel will be significantly higher than that in the steam flow, and the heating rate of the mold will be faster than that in the conventional heating mode.
Our company's new medium voltage, high pressure, split energy saving control equipment, can effectively shorten the length of heating pipeline, shorten the heating and cooling time, namely shorten the production cycle;At the same time, it saves a lot of heat energy and reduces the production cost.



 

	Other brands	Our company brands
The heating medium	Superheated water: the temperature is 180ºC	Steam: temperature 180ºC-230ºC
Heat content	The enthalpy of 1Kg of superheated water is 762.84 kilojoules	The enthalpy of 1Kg of steam is 2777.67 kilojoules
The heating mode	Heat transfer (gradual transfer of heat, slow absorption)	Heat release (instantaneous physical transformation, rapid heat absorption)
Heating power	100-240kw power, high cost for single product	Small power of 80-150kw can be used for high-power products of the same model, with low cost per product
Storage volume	The pressure drop of about 300L is large and the production is unstable	Stable pressure of about 600L can guarantee stable production
Energy saving way	Small volume heat transfer, large displacement increase electricity load	Large water tank heat exchange, save a lot of electricity
Heating mode	Straight in and out, consuming heat	Reasonable control of export time to save energy
Control line	Copper pipe, easy to corrosion lead to damage of gas path components	Stainless steel tube, prevent corrosion and pollution of gas path
Spare parts	Vulnerable parts welding, modular parts, replacementTrouble affects production	Vulnerable parts modular, easy to replace
Electrical appliances brand	Zhengtai, Omron(counterfeit), etc	ABB, Siemens, etc

ST-2000 series mold variable temperature steam thermal efficiency control system main operation interface display:


Operation panel language in Chinese and English

ST-2000 series mould variable temperature steam thermal efficiency control system

★Boiler water source input: 0.20 tons/hour;It is recommended to use softened water or purified water, user piping;
★Power access: 380V 3-phase 5-wire.Recommended cable section > 105mm2, the user is equipped with cable;
★Cooling water inlet and outlet: water temperature below 250C, softening water quality;Stainless steel temperature resistant pipe is recommended.
★ compressed air input: air pressure is 0.6-0.8mpa, which needs to be freeze-dried to remove water and filter and dust;
★Mold interface: users should be equipped with the corresponding pipes and water drainage according to the mold, waterway structure, it is recommended to use stainless steel temperature resistant pipes.

product case: